Back
ID # 66518938

2027 KTM FREERIDE E

  • 2027 KTM FREERIDE E
  • 2027 KTM FREERIDE E
  • 2027 KTM FREERIDE E
  • 2027 KTM FREERIDE E
Call for Price
 Get a Quote  Get Financed  Value a Trade  Contact Us  Book a Demo   Get Directions  Print
Overview

PURE ELECTRIC FREEDOM

The all new KTM FREERIDE E brings a fresh surge of energy to electric offroad riding. Lightweight, agile, and near silent, it unlocks new possibilities on trails where traditional bikes can't go. Its powerful new drivetrain delivers instant torque, 19.2 kW peak power, and three adaptable ride modes, while the upgraded 5.5 kWh interchangeable battery offers up to three hours of riding freedom. A newly developed chassis, WP XACT/XPLOR suspension, and road legal capability make it equally ready for remote paths or everyday play.
Specifications
Model
FREERIDE
Category Name
Motorcycles
Year
2027
Sale Type
New
Manufacturer
KTM
engine

2027 KTM FREERIDE EDrivetrain

Boasting 8,3 kW of nominal output, 19,2 kW peak power, more than 37 Nm of torque and top speed of 59 mph (95 km/h), the motor is a resolute water and dust proof unit that is fully integrated into the overall character and agility of the motorcycle.

2027 KTM FREERIDE EDisplay

The KTM FREERIDE E uses the same LCD dashboard as the KTM EXC-F dual-sport range. The resistant display shows a single value at a time to ensure the rider remains fully focused on the route ahead. Thanks to quick contact with two buttons, the options can be cycled. The options are the state of charge, the selected ride mode, and a regenerative map with odometer, clock, trip time, and accumulated run time.

2027 KTM FREERIDE ERide Modes

The KTM FREERIDE E has three ride modes that suit specific scenarios or performance parameters. Each setting changes the torque and power delivery. Three recuperation settings can be engaged to assist with maximum engine efficiency and battery life: OFF, MID, and HIGH. These can be selected against a specific mode to ensure flexibility with the power package of the KTM FREERIDE E. The ergonomic four-button switch cube on the left handlebar can easily activate the ride modes and other options.

 

chassis

2027 KTM FREERIDE EFrame

KTM prioritized light feeling and handling, as well as agility, of the KTM FREERIDE E and developed a chassis with the drivetrain and battery at the load-bearing core for a low center of gravity feel. By hinging the chrome-molybdenum steel frame on the engine and battery architecture, the chassis can remain featherweight and slim. The KTM FREERIDE E's seat height is 35.6 in (910 mm).

2027 KTM FREERIDE ESuspension

Thanks to 43 mm WP XACT split design forks, the front end is reactive but also glued and planted when needed. Adjustment is easily made with the single air pressure valve, supplied air pump for preload, and clickers for compression and rebound. The fully adjustable WP XPLOR PDS system provides 250 mm of travel on the rear end.

2027 KTM FREERIDE EBrakes

BRAKTEC systems deliver fantastic results with a 260 mm front disc and 220 mm on the rear. Mounting of both front and rear brakes on the NEKEN handlebars is one of the key differences from other motorcycles in the KTM portfolio. The ability to operate both forms of stopping power with two hands allows the user to concentrate more on body stance and foot position.
software & electronics

2027 KTM FREERIDE EBattery

The 63.9 lb (29 kg) MX50 Lithium-Ion battery has been tested and proven in the most extreme conditions and constructed in a way that means it is interchangeable. Removal from the motorcycle can be performed easily in less than 10 minutes. The battery is IP67-rated, and its capacity is 5,5 kWh. Nominal voltage registers around the 50 mark, and the battery life can withstand more than 1000 charge cycles before dipping to 80% SoH. Typical Enduro riding time is estimated to be between 2 and 3 hours. 

2027 KTM FREERIDE ECharger

The KTM FREERIDE E comes with a 660 W charger and will complete a full charge in 8 hours with a normal household supply. 20-80% rate can be achieved between 4-5 hours.

2027 KTM FREERIDE ESafety

In the case of a tip-over, the KTM FREERIDE E is equipped with a 'roll-over' sensor that cuts the power when tipped over. 
engine technical details
Power
19,2 kW
Torque
37.6 Nm
Rated Output
8,3 kW
Charging Power
660 W
Electric Motor
50,4 V - PMSM
Battery Capacity
110 Ah
Max. Motor Speed
12000 rpm
Traction Battery
MX50 Lithium-Ion Battery
Charging Time 80 %
360 min.
Charging Time 100 %
480 min.
Charger Line Voltage
90 - 265 V / 50 - 60 Hz
Secondary Gear Ratio
13:50
chassis technical details
Chain
520, Non-sealed
Wheels
1.60 x 21"; 2.15 x 18"
Handlebar
Pro Taper, Aluminium Ø 28/22 mm
REAR BRAKE
Disc brake
FRONT BRAKE
Disc brake
FRAME DESIGN
Chrome-molybdenum steel frame
Tyre Width (rear)
120
Tyre Height (rear)
90
Tyre Width (front)
90
Steering Head Angle
65.6 °
Tyre Height (front)
90
REAR SUBFRAME DESIGN
Aluminium / Polyamide Glass Fiber
Rear Brake Disc Diameter
220 mm
Front Brake Disc Diameter
260 mm
suspension technical details
Fork Offset
20 mm
Rear Suspension
WP XPLOR shock absorber with PDS
Front Suspension
WP XACT USD Fork
Steering Head Angle
65.6 °
Suspension Travel (rear)
240 mm
Suspension Travel (front)
250 mm
dimensions technical details
Wheelbase
Fehlende Variable
Seat Height
910 mm
Ground Clearance
360 mm
Weight (without Fuel)
112 kg
literature

Name

Link
Technical Specifications Download

 

Documents
Privacy |  Terms |  Accessibility |  Site Map |  Dealer Login
© 2026 Maclean’s Sports Ltd. - All Rights Reserved.